Showing posts with label fly tying. Show all posts
Showing posts with label fly tying. Show all posts

Saturday, 18 May 2013

A Day on the Green


Leopard spotted brown. 
After working every day but one for the past month, I managed to take a day to fish the Green River on my drive home from a conference in Utah.  The Green River below the Flaming Gorge dam in Utah is a world class fishery.  There are reportedly 20,000 fish per mile and I believe it. The "A section" extends seven miles downstream from the Flaming Gorge dam to Little Hole.I'd planned to fish downstream from the dam access but I abandoned that plan because of the crowd.  Instead I drove downstream to the Little Hole access.  The parking lot there was nearly empty when I arrived at 9:30 AM.  It's the takeout for boats floating from the dam and by afternoon it is filled with trucks towing trailers that have been shuttled down during the day.

It turned out to be a very good day. Saddly, I was a week late for the Blue Winged Olive hatch, though a few olives did come off during the day. Even so, the fish were still keyed in on BWO nymphs, and I caught as many fish as I care to in a day. I know because I lost count. If I had to guess I landed 15 and hooked about twice that many.  None of the fish I landed was under 15" and none were over 20".  All of them took my Black Back Wet Dream.

BBWD tied on a size 20 Dai-Riki #135 hook - black flashback.
I tie this version of the WD on size 18-22 Dai_Riki #135 hooks.

Black Back Wet Dream (BBWD)
Hook: size 18-22 scud/pupa hook
Body:  olive or  brown olive thread
Tail: a few fibers from a Wood Duck  flank feather
Thorax: tan/brown dubbing
Wing Case:  Black Holo-Tinsel

In the pictured fly I used 70 denier brown olive Ultra thread, the thorax is SLF Spikey Dubbing in natural fox color and the wing case is black Holo Tinsel.   It is a synthesis of Mark Engler's original WD (wet dream) pattern with a flashier version of Randy Smith's Tyvek Baetis.  Engler's pattern was renamed the WD-40 by  Umpqua when they commercialised it - so as not to offend delicate sensibilities. I do not share their compuction. Many folks assume the WD stands for "wood duck".  Good marketing at work I guess.  Smith's pattern uses a wing case tied from Tyvek that has been colored black.  Mine uses black holo-tinsel.   Feel free to tie as many as you like, it's proving to be an amazingly effective pattern, but also, consider this post a copyright on the pattern should you want to commercialize it.

An eighteen incher.
The Green is primarily a brown trout fishery although I did catch some nice rainbows too, fat fish. These fish are heavily pressured and can be selective feeders.  The water is extraordinarily clear and good sized fish hang on the banks. You see many many of them as you hike up the trail.  It can be a frustrating experience for the tyro to fish to one of these large trout, clearly on the feed, in shallow water.  There is nothing more satisfying than taking one of these fish.  Once again, I complain that the fly shops are pushing the big flies to novices because so many fisherman are reluctant to fish the small flies.  The green has a good hatch of cicadas and a big black foam fly is a common pattern there.  Later in the summer there is good hopper fishing as well.  The fly shops are starting to push those flies though I did not see one cicada nor did I see any hoppers.



I met a man on the trial who I took to be from Oregon since he talked about fishing to spawning rainbows on the Williamson River. These are fish that run up out of Klamath Lake. He seemed somewhat disappointed with the Green in comparison. He said he'd done well the day before but he complained that he'd had to fish size 20 flies.  When I first met him he was fishing a cicada and when I saw him later had a streamer tied on.  By that time he'd had one hook-up.  Somewhat hopefully, he told me how he'd met someone the day before who frequently fishes the Green and who prefers to tie on an Adams or a Royal Coachman. A size 20 Adams would actually be a decent imitation of a BWO and there is a kind of local beetle with red/orange colouring. So who knows, maybe an Adams or a Royal Coachman would be just the ticket.  I expressed my doubts which prompted him to walk on.

Looking down into Little Hole on my way out at about five-thirty.

The Green is a great river.  I caught it yesterday at an in between stage, after the BWO hatch but before the summer hatches.   I promise myself that next year I will catch the BWO hatch.

Sunday, 8 January 2012

Winter fishing on the North Platte


We haven't really had much of a winter yet and when temperatures reached the mid-50's during the first week of January I couldn't help but think about fishing.  I kept my eye on the weekend forecast for Alcova where the high temperature for Sunday was predicted to be 48°F.  As the week progressed the forecast high dropped lower and lower, I decided to go anyway.  I fished from about 11:30 until 2:30.   By the thermometer in the truck, which I read every hour or so as I thawed my frozen feet, the high for the day was 36°F, a couple of degrees below the Saturday forecast for Sunday.

With the flow out of the dam at just 500 cfs fishing was quite different from 5000 cfs in August when I was last there.   At these temperatures the guides on the rod ice up and the wading is brutal.  At these temperatures the fish are just plain sluggish too.  There is a short period during the day when they seem to be mildly interested in feeding.   Just before 1:00 the fish turned on for about a hour and I managed to hook a half a dozen fish and landed five of them. They were all rainbows between twelve and fourteen inches. A fish this size used to be considered small for the reef but any more they seem typical.  I did have one good fish on for a minute.  Once the fish realized it was hooked, it surged off shaking its head. Just as I managed to get the line onto the reel I had nothing but a steady pull, no life at the end of the line, just constant tension.  I broke off and walked back to the truck to rerig while warming my feet. 


When fishing nymphs or midges I always tend to throw a standard two fly rig with enough tin shot to get the flies down (how many depends on the flow) and anymore I just use a thingamabobber as an indicator.  I tried serving up various patterns including leeches (green and black), scuds, a crane fly, a crayfish, a red midge larvae and of course the old standby glass beadhead midge pupae in size 20.  I only hooked up on the midge pupae so eventually I just fished two of those.  I was using black and grey/tan.  When I was packing to leave, another fisherman who had been working the far side of the river from me came by and asked me what I was hooking up on.  I showed him my rig and he was genuinely surprised (as non-midge fishermen usually are) that such tiny flies actually worked.  He was fishing a three fly rig which included a leech, a scud, and a rock worm pattern. He did not hook up.


Tying midges patterns is dead simple.  There are about 600 beautifully illustrated midge patterns in the Takahashi and Hubka book Modern Midges: Tying & Fishing the World's Most Effective Patterns.  Ed Engle's book Tying Small Flies is excellent. You can see some tying instructions for the the midge pattern I use most (just vary the colors) in a previous post on the Mercury Midge.  I like the TMC 2488H hook these days, it's very strong.
If the weather is similarly warm next weekend I think I'll head up to the N. Platte again. I might try the Miracle Mile for a change, I haven't fished there in years and I've heard about guys swinging flies for big browns.  I really need to fix the pesky pinholes in my waders before venturing out again.









Sunday, 3 January 2010

Dredging for Winter Trout

Just back from Oregon, Garrett and I fished Gray Reef on the North Platte. Air temperatures around 28°F, it was overcast early and then cleared up in the late afternoon. We got on the water around noon and fished until the sun set. Amazingly, aside from some guys fishing from a drift boat below the boat ramp there was no one else there when we arrived. Downstream the river was slushy and not much farther down it was frozen. It looked like you might have been able to walk across the Platte four miles downstream at the Government Bridge access.  During the day a pair of fly fishermen showed up and then later a single angler came. None of them lasted too long. The single was throwing a Spey line. There were some duck hunters up on the impoundment.

Garrett was fishing the Beulah 10'6" 7/8 switch rod I got him for Christmas with the matching Elixer line (with no head) and a 12 foot leader, with an indicator, an AB splitshot and a green leech pattern as the main fly and various others for the dropper. He was hooking up all day on the leech pattern, landing around eight fish. I was fishing my Sage 9' 8 weight RPLX with a floating line and a 10 foot leader with an indicator, one or two number 4 split shot and midge patterns. I didn't do as well as he did (as usual) but I did hook up with four fish and landed one; a rainbow about seventeen inches.


The weeds were bad, worse than I remember seeing there. Apparently there was an issue with the dam this fall and the normal yearly flush did not occur. I'm sure the guides and flyshops will deny it but it seems to both of us that the average size of the fish has decreased significantly in the past couple of years. An average size fish below the dam used to measure around twenty inches and often larger; now the average size seems to be more between sixteen and eighteen inches. Garrett did not land one fish that he thought was over eighteen and mine certainly was closer to seventeen inches. Obviously these are beautiful fish and would be considered big most anywhere else, but the average sizes are not as large as they once were. All the hype about Gray Reef being the Big Fish destination in the lower 48 might have something to do with it. In warmer weather the run below the dam is lined with fishermen, five or six to a side, all day every weekend.

I've always though of the reef as a small fly tailwater and have been successful with midge patterns.  Garrett's success using the leech pattern has me thinking about that.  My hookups all came on a size 20 or smaller red midge larva pattern;  a bit of red thread on the hook with a rib of red wire.  My current theory is this: when the fish turned on for about an hour or so around two, they were happy to take my tiny offering.  At the other times, with the near freezing water and their sluggish metabolisms the bigger fly, fished slower and deeper, was just enough more appealing for them to take.  I came home and tied up some leech patterns.

Tuesday, 29 December 2009

Winter Steelheading in Oregon


                                                     Ox Bow Park on Christmas eve.

The lushness of the western Oregon forests never fails to impress me.  It is a landscape colored in deep greens and blues, a topography of flowing water and dripping dark forests, the fecundity of the terroir is palpable.   I have images of thick green ferns under snow, moss covered firs and cedars and a river of fog flowing along the Sandy River on Christmas eve at dusk.  This is country where fishing for steelhead is still possible; not perhaps as it once was, but still possible. Though the native sea run rainbows have been pressured and have been nearly driven to extinction, thanks to significant conservation efforts there are fishable populations of hatchery fish and growing numbers of wild fish.  Steelhead migrate upriver at dusk, at night and at dawn they typically hold in deeper runs and pools.  A good rain or upstream melt will color the water and deepen the shallower rapids and will bring the fish up. They know this without knowing. They will hold downstream of their home tributaries, below the gravel bars at the mouth, in deeper water, waiting for the water to rise.

Winter steelhead fishing is cold hard work.  Wading deep into the icy flow, cold hands and cold damp feet, negotiating slippery rocky stream beds, iced guides and casting over and over again to cover the water,  concentrating on every cast and  focusing intently on every drift, watching and hoping for a sign of a take.  In winter the flies must get down into the run and inevitably hang up on grasses and waterlogged limbs invisible from the surface. You find the right depth by fishing deep enough to snag the bottom (and perhaps to loose a beautiful fly) and then try to back off a bit. 

Before this trip I (re)established my presence on the Spey pages forum.  I'd joined this internet discussion before leaving for Scotland in 2008 but did not, I do not believe, post any message.  This time I asked for advice in a thread I titled Christmas Steelhead in Oregon.  I asked what rivers to fish near Portland, what flies to tie, and any other advice.  The response from that community was extraordinarily generous.  I was told that the Sandy River and the Clackamas are very close to Portland and should fish well at that time, that the Trask, Wilson and Kilchis are coastal rivers that flow into Tillamook bay and will also hold late December winter run fish. I had generous invitations to fish the Deschutes near Maupin and the Rogue in southern Oregon.   Those rivers were much farther from Portland than we were able to justify traveling when there was so much unexplored (by us) fishing so close.

Local knowledge is precious. Ultimately, that's what people pay for when they hire a guide. Aside from the obligatory ghillie that assisted me on the Tweed in Scotland, I've never hired a guide.  Not for climbing in the Alps, not for fishing nor for hunting. I was advised by more than one correspondent on the Spey pages to "shell out", to hire a guide. It was not bad advice though for me it negates a significant part of the point of the endeavor; to figure it out. It may seem to be a petty point of pride to have never hired a guide, but I am a hopeless autodidact.


December 26th:  Garrett, Sarah and I fished the Sandy River at Ox Bow park. I had scouted it out on Christmas eve with Jasper and had some sense of the river there.   I was fishing, as I rarely do, my Scott 14' 9 weight ARC Spey rod. I was casting a Loop long-belly line (the only one I own) with a 14' fast sinking tip and three feet of 14 lb. flurocarbon tippet and with various flies attached. I am a passable, though never great, fly caster.  Spey casting is newer for me and although I believe I was fishing the water well, it was not particularly pretty.  I was having trouble turning over the sink tip and I shortend it up about 18" that night, the change made a significant difference in my casting the next day.  Garrett was fishing his new Beulah 10' 6" 7/8 switch rod with Elixir line and a 10' RIO sinking leader.  Sarah was fishing her traditional Temple Fork 9' 8 weight with split shot, and a Thingamabob strike indicator.


We got to Ox Bow park, paid our five dollars, and started  fishing at about 9AM.  It was a late start, but we'd been delayed buying licenses at Walmart since no one there could recall their passwords for the online system.   There were plenty of other fishermen on the river already but we only saw one steelhead landed, at around noon.  It was plucked out of the head of a long run by a guy using a baitcasting setup. He and his two partners had the same rig: a  bobber, some weight and  and a yarn "sandworm" for a lure which they drifted down the run. The fish itself was a nice hatchery fish and provided clear evidence that fish were in the river. We fished with increased focus and intensity after seeing it caught.  The baitcasters kept fishing the same drifts at the head of the pool. I moved below them casting and stepping down the run swinging flies. I was hopeful on every swing but I had no hookup. We fished until around 1PM when my feet felt like they were about to fall off from the cold.  We warmed ourselves in the truck and ate some lunch. In the afternoon we fished another long run further upstream.   Garrett had a solid tug at the tail of a pool but the fish was not hooked.  I had none.

That evening I received a call from a friend of my sister's who guides for winter steelhead in the Portland area.  Aaron spends his summers guiding for salmon and steelhead in Yakutat, Alaska. Hobo Fishing is the name of his winter guiding service.  He asked what we were looking for and I told him that we were swing flies on Spey rods. He said that the Sandy might well be the best place around for that kind of fishing; but he also said he'd done well on Eagle Creek that day. If we wanted to catch a steelhead he advised us to head there the next morning.  Eagle creek was too small for Spey rods  but we had traditional fly rods with us as well.

December 27th:  Eagle Creek is a tributary of the Clackamas.  It is a smaller stream that flows through a dense forest of cedar and fir.  You can wade across the stream in many places, it is not Spey casting water.  With good prospects for fish (and based on Garrett and Sarah's enthusiasm) we headed there the next day.  There were heavy low clouds and fog and I anticipated rain all morning though it never did.


Fishing a small run upstream from the park I was startled when a steelhead darted out of the depths of the pool into the shallows near my feet when the movement of my cast spooked it.  Steelhead are so large they appear out of place in such small water.  Whenever I have seen them move like that I am astounded by their speed and how snakelike their movement is. They swim with their entire bodies not their tails.  Once, on the Trinity, I watched a steelhead  from above, looking down from a high embankment at the head of a pool.  It was late afternoon and he was preparing to negotiate a shallow rapid.  He moved back and forth across the base of the white water, dropping back into the green pool below then coming  up again and zipping back and forth and back and forth like the shuttle on a weaving machine.  To steelhead, with their speed and grace of movement, the scale of the river is far different from my own perception of it, stumbling a step at a time downstream on slick rocks.

Upstream, Garrett had hooked a good fish on a cream colored egg pattern drifted below a log and through the tail of a nice pool.  The fish exploded out of the water and took him downstream a hundred yards and halfway back up to the pool where he'd started before Garrett managed to bring it to hand.  Its missing adipose fin marked it a hatchery fish and we kept it.   Through no want of trying Sarah and I did not hook up.

In the late afternoon we drove down to a parking area just upstream from the confluence of  Eagle Creek and the Clakamas.  Garrett and I rigged our Spey gear and hiked down to the river with Eagle creek flowing toward the sea on our right. As we studied a large pool near the mouth Garrett commented that his fish, the fish he'd caught that morning, had rested in that pool.  He said that catching a steelhead in a pool was like having caught one out of every pool downstream in the river.  A thought connecting the fish to a thread of water all the way back to the sea and back in time to its birth.

We waded out a gravel bar to an island and fished a long run down the far side on the mainstem of the river.  The water ran fast and deep on the far side of the run against a sheer cliff.   A house was perched on the top of the cliff. It had large windows facing west overlooking the river.  Every time my cast failed to unroll out into the run I flinched at the thought of being watched from above. The fast sinking tip did turn over better missing a foot and a half of its original length. We walked across the island and fished the channel on the west side.  Deer sign was everywhere.  At dusk, standing cold and waist deep in a near perfect long deep run, a large fish porpoised twenty yards below my fly.  Adrenaline surged and I fished intensely until it was too dark to see. By now Garrett was back at the truck with Sarah. Walking out alone, I lost the trial and stumbled upstream through a marsh along the creek.
 
That night, Garrett expertly baked two thirds of his fish in copious amounts of  butter, lemon salt and pepper.  It fed nine people at a dinner party at my daughter's house. Two nights later it fed another two people, non-strict vegetarians who nevertheless would not eat the elk stew I'd prepared.




December 28th: Garrett and Sarah could not fish and I was not able to get away until mid-afternoon.   Though I needed more time on the water with Spey rod in hand, I had concocted a theory that needed testing. My theory was pieced together from bits and fragments of information, some freely given and and some leaked along the edges of stories told.  Though perhaps misguided and certainly idiosyncratic, I applied a kind of personal hermeneutics of piscatorial narrative; an attempt to read a truer underlying meaning.  My theory as premised on a casual comment "... eleven miles upstream ...".   A comment that the story teller later seemed to want to retract.  Really, I believe he thought better of giving more details thinking I'd get lost. Though he declined to say more when I asked, he generously offered to take me there himself.  I was  unable to go with him so I tried to piece it together for myself. Eleven miles measured on a map. But which fork? Topography provided a probable answer.  From fragments of a half told story I'd constructed in my own mind a kind of steelhead Eden. A small creek flowing through a narrow canyon strewn with house-sized boulders guarding pristine deep green pools, each pool holding wild steelhead.

It was a cockamamy idea I know, to give up a perfectly good afternoon of steelhead fishing to confirm or refute a shaky theory formed of whole cloth.  To indicate my state of mind I'll simply mention that I almost did not make the trek, not because the idea was so far fetched or because I doubted I could find this place, but because it was going to be just too easy, something like shooting fish in a barrel. In the end I just wanted to see this imagined place, and besides Penelope wanted to hike and Erdos needed to get out in the woods for a good long run before the two day drive home.

We drove up high, far above the stream and into the snow on the mountain above the canyon. The road was marked as dirt on the map but was a sheet of ice. We found what I thought must be the old forest road I was looking for, one of many, and I parked the truck.  It would be no more than two miles, steep downhill all the way.  The narrow spacing of the lines on the topo map made me wonder if we could even find our way into the bottom of the canyon.  Were upstream above a waterfall?  We headed downhill through old clear cuts covered in heavy in snow. There were bobcat, fox, deer and elk tracks. We crossed man tracks too, impressions of large boots in the snow that seemed to confirm that someone else knew what I suspected.  Not far down, the man tracks disappeared.  The abandoned logging roads connecting clearcuts that we'd followed ended at a wall of dense forest. We stepped into the trees, dropping down a steep ridge into the tangled bottom of the canyon.  The rushing water we so clearly heard below us on our way down through the ferns and towering firs turned out to be a tiny brook.  No more than a foot wide, it  flowed down to merge with the main creek below.  We were almost there, but descending further we became hopelessly brush bound in thick alders.  By now there was less than an hour til sunset, certainly no time to fish should we even get there and the hike back up was going to be hard.  Reluctantly, we turned and climbed out of that deep narrow canyon, back up to the truck parked on the icy road high above.  My theory remains unrefuted.

  *                   *                   *

Once correspondent on the Spey pages wrote: Catching a winter steelhead during any three-day window is a daunting challenge even for resident veterans.  Even though I did not land a steelhead or even hook one brielfy,  by my reckoning the trip was by no means unsuccessful.  I'll call it a good try for winter steelhead in northeastern Oregon.  I expect to build on the knowledge gained from these experiences fishing these waters many more times over the years.  Thanks go to Aaron and to too many of the members of the Spey pages to mention, all freely provided specific and useful information that made the trip a success.

Monday, 14 December 2009

Skykomish Variation



This is a variant on the Syd Glasso's Skykomish Sunrise tied with a quill wing instead of the hackle wing.

Skykomish Sunrise Variant
Hook: TMC 7999 #2
Body: Silver tinsel with a silver wire rib, orange angora dubbing
Hackle:  Dyed yellow rooster tied Spey style, Fiery Brown Schlappen
Collar: Red Golden Pheasant
Wing: Orange turkey quill.

Time to stop tying and start packing for the trip!

 


 

Wednesday, 9 December 2009

Dee Improvisation



I improvised this fly based on collected impressions from my first day with John Shewey's book Spey Flies and Dee Flies: their history and Construction.  It is a synthesis of Miss Grant (pp. 98), Dave McNeese's  Un-Named Circa 1977 (pp.120) and in some odd way, the Dessaigne LaPatriote and La Touque patterns (pp. 131).  Of course my tying skills are meager in comparison to the cited examples, I simply claim they are inspiration.

Dee Improvisation
Hook: TMC 7999 #2
Body: Gold tinsel with a brown copper rib, Claret and Fiery Brown Angora
Hackle:  Golden Pheasant flanks, Red and brown and Fiery Brown Schlappen
Collar: Red Golden Pheasant
Wing: Golden Pheasant (Dee Style)



The Golden Pheasant wing fiber would not stay married and I dabbed some flexament in the middle or each wing to hold them together - heresy! Aside from the tying, there's plenty that I think is not right with the pattern, but this fly contains some core or essence that appeals to me. I imagine that it might prove itself in low water.

Blue Grouse - Dee Style



This fly is inspired by Syd Glasso's Black Heron Spey and in particular a tie done by FlyTyer on the Speypages.  The wings here are tied in a Dee style using Blue Grouse tail.  Since there is no Heron in it at all it seems wrong to call it a Black Heron variant. 

Blue Grouse Spey:
Hook: TMC 7999 #2
Thread: Black
Body: Gold tinsel ribbed with  Copper Brown ultra-wire (small) and a dubbed front body of black angora stonefly mix.
Hackle: One wrap of dun hen, black Schlappen.
Collar: Guinea Fowl
Wing: Blue Grouse



I killed the grouse with the 20 GA two weeks ago after Erdos scented it and pointed it in a thick stand of firs. I cooked the grouse for dinner last weekend, and now it's tail is in these flies. If only Erdos hadn't eaten most of the left half of the tail on the "retrieve" I'd be able pair up more left and right feathers for matched wings.

Sunday, 6 December 2009

Courtesan Spey variants


These are variants on Syd Glasso's Courtesan Spey pattern.

Courtesan Spey Variant I
hook: TMC 7999 size 2.
rib: silver tinsel with silver wire counterwound
hackle : brown schlappen, Spey style
collar: orange dyed Guinea Fowl flanks
wing: orange Whiting Streamer hackle, orange
body: orange floss and angora


Courtesan Spey Variant II
hook: TMC 7999 size 2.
rib: gold tinsel with gold wire counterwound
hackle : brown schlappen, Spey style
wing: orange Whiting Streamer hackle, orange
collar: orange angora
body: orange floss and orange angora

Friday, 4 December 2009

Books: Spey Rods, Spey Casting and Spey Flies.

In recent weeks, when I have a free moment, I have been planning for Steelhead fishing. Christmas in Oregon will give plenty of opportunity to swing flies for these beautiful big sea run rainbow trout. Before my trip to Scotland in 2008 I purchased a modern salmon rod; a Scott ARC 14' 9 weight for casting in the style developed on the Spey River in Scotland. The term "Spey casting" is toponymous like the distinctive Telemark turn in skiing which was also named after the place where it was developed, the Telemark valley in Norway. Spey casting is equally distinctive, as are the flies originally tied for fishing the river Spey.
My way of planning a trip to Oregon includes pouring over 130 year old British fly fishing books. I started looking for copies of Arthur Edward Knox's book Autumns on the Spey. This book is the first that gives explicit tying instructions for a selection of original Spey patterns. Low and behold, the future is here, I discovered that Google Books has scanned a rather astounding collection of rare and important titles from the Fly Fishing literature. The link above points to the online copy of Knox's book online. The scanned copies are available to read on the internet and for free download as pdf or epub files. To read the epub files you can download a free reader from Adobe which does not appear to include any print capabilities. Unfortunately, the google pdf files do not include figures, you have to look at them online or you can clip them from the online text individually using the clipping tool on the Google site.

Another title relevant to Spey casting and Spey flies is an 1895 edition of George M. Kelson's book The Salmon Fly: How to dress it and how ot fish it. Also, there are numerous editions Francis Francis's book titled A book on Angling: being a complete treatise on the art of Angling in every branch. The link it to the fourth edition of 1876. The images above of the Spey and Loop cast are from Frederick George Shaw's The Science of Dry Fly Fishing and Salmon Fly Fishing. Although the Knox, Kelson, and Francis titles are of significant historical interest to Spey casters and steelhead and salmon fishers who tie and fish classic flies, many titles, even old ones, by better know authors do not seem to be available for full download e.g. for trout fishing, no title by G.E.M. Skues is freely available.

Sunday, 15 February 2009

Tying the Rusty Spinner

This pattern imitates the imago (adult) form of a number of mayfly species, many of these bugs end up a rusty reddish brown color in the final phase of their lifecycle. This particular one is tied on a TMC 100 dry fly hook in size 16. The thread is 6/0 unithread in Rusty Brown, the tails are light dun microfibbets, the wing is an off-white poly yarn and the dubbing is superfine dubbing in mahogany brown.

1. Wrap the hook with thread to form a base and then tie in the tails. To get them to stand up, build up a small bump of thread under then and then cinch them down. To separate them, tie them in with a figure eight, going between them and alternating wraps over them. These tails are a bit linger than the body, maybe too long, but it is a feature that it may not hurt to exaggerate a wee bit.



2. Tie in the wing material about 2/3 of the way up body, also using a figure eight wrap.


3. Using a bit of dubbing wax, spin a tiny pinch of dubbing on the tying thread.



4. Wrap a tapered body (this one is a bit uneven) and then whip finish the head. Trim the wings to length bu pulling them straight up and giving them a bit of a haircut. The wings on this one may be a bit too long but can be trimmed later or even stream side


This is a very useful pattern that should be in every flybox. One afternoon,  around mother's day 1991, I was fishing Cairn's pool on the Beaver Kill during an astoundingly prolific caddis hatch. Fish rising everywhere and I could not hook up at all, and neither could any of the other five or six fishermen standing the river to my left and right, upstream and down. There are some really large trout in that pool who, when bothered by the likes of me, feed in the main current which runs in a channel along the far bank. That's just about out of my casting range. Anyway, there were so many caddis moving upstream in the air that, at one point, I had a sensation of vertigo from the wall of right to left upstream movement in front of of me. I was balancing on a rock chest deep in the pool trying to cast to the the far bank without letting the water in over the top of my waders. I was, one at a time, trying every caddis pattern I had in my box. It was dusk and the frustration was palpable. Searching the box for an untried pattern, I looked down at the water not more than a foot below my nose and saw a Hendrickson spinner floating by. I stopped fishing and looked closer and sure enough, there was a steady stream of spent spinners floating by, nearly invisible with their transparent wings lying flat on the water. I pulled out a rusty spinner from my box and dropped on in the water next to a natural. I was stunned, I could hardly tell them apart. I tied one on and, with less than a half hour of light left, I caught three nice trout. The guy downstream from me, only about 20 yards away rather casually asked me what I was using. I was happy enough about figuring out the real hatch I happily told him and even gave him a fly when it turned out he did not have one in his box. This is a fundamental fly that should be in every flybox. It is a good imitation of the spinners of many species of mayflies.

Sunday, 8 February 2009

Tying a Mercury Midge

The fly shown here is being tied on a TMC 2487 hook in size 24. The bead head is a Spirit River quicksilver glass bead in the extra small size. Thread is 8/0 Uni-Thread, the body is just a few hairs of white Angora goat and the ribbing is fine silver wire.

1. Put the bead on the hook and clamp it in the typing vise. This step is not as easy at it might seem, I need to wear a magnifying head piece like a jeweler might wear.



2. Wrap the hook back to near the bend with the white thread.



3. Tie in the silver wire and build up a bit of body with the thread.



4. I spin the tiniest bit of white dubbing on the thread and wrap forward, tying off the thread.



5. Wrap the wire ribbing forward, in the opposite direction of the thread wraps.



6. Tie off the wire and trim it off. Whip finish the head behind the bead. I use a Materelli whip finisher.

Sunday, 11 January 2009

Tiny Flies


It can be difficult to comprehend how small a fly really could be. The photo shows a few of the flies out of my midge box (click on the photo for an enlarged image.) They are really really small. With my eyes, I need a magnifier to tie them and reading glasses and a hemostat are almost required to tie them on a tippet to fish them. I forgot the reading glasses the other day on the South Platte and managed to tie them on without them, but it wasn't easy.

In the tailwater fisheries of the west, tiny flies are essentially required. These are the streams that flow out of bottom release dams and therefore offer the fish a year round consistent water temperature. In the summer it's nice and cool and in the winter it is relatively warm. The bottom release temperatures may actually be too cold to be optimal for trout, say as cold as 39-40°F. But some dams, like the one at Flaming Gorge in Utah on the Green River are designed to mix water from various levels to provide optimal temperatures for trout growth, around 50°F. And indeed, there are more trout per mile in the Green below Flaming Gorge than any other river on the continent. These dams simulate the great spring creeks like the Henry's Fork of the Snake and Silver Creek both in Idaho. Other great tailwaters beside the Green include the Bighorn in Montana below the Yellowtail dam, the San Juan in New Mexico below the Aztec dam and the North Platte below Grey Reef. There are more. I think of the Big Horn, the Green and the San Juan as the big three.

Because these waters provide such uniform temperatures, they grow huge trout. On the other hand, the aquatic bug life is pretty much restricted to smaller bugs; Chironomids (the midges), and a couple of species of smaller mayflies; Baetis (Blue Winged Olives) and Tricorythodes (Tricos).

Since these tailwater rivers have so many fish, they're fished hard and generally have mostly catch and release regulations in force. On the North Platte, you can keep one fish over 18" (I think) and similar rules apply on other rivers. That means that in a lifetime, most of these fish are caught many times, and that makes for so-called educated fish. They stick to eating the natural foods that are in the stream and maybe once can be tempted to take a bit of some larger buggy thing that they've never seen before. When they do, they learn quickly not to. They key into the natural foods available, and that is pretty much all they will take. They'd eat a real worm, but regulations in these places usually restrict the choice to artificial flies or flies and artificial lures only. Some places even make a restriction that the hooks must be barbless.

Anyway, there are lots of big fish, and they're feeding constantly and exclusively on the tiny aquatic insects; on the nymphal (mayfly) or larval (chironomid) forms underwater and on the winged adults when there is a hatch and they come to the surface.

I was on the San Juan a few years ago and when I started fishing, around 9 AM or so, there was a older guy fishing in the best spot on Texas Hole. This is a deep hole just by the parking area with an astounding number of really really large trout; mostly rainbows. Texas hole fishing is done combat style, shoulder to shoulder, and altough it's less than an acre in size, all the drift boats stop to fish it for a while too. Anyway, this older guy was in perhaps the best spot to fish the hole; in the braided water that flows in on the south side. I fished upriver most of the day and around 4 PM I was wandering back to the parking lot and saw the same older man wading out of the good spot. He'd been there all day. I decided that, well, since the best spot was opening up, why not fish it for a bit. As he walked out, I asked him how he'd done. He was disgusted. Amazingly, with huge trout continually feeding literally right at his feet, he hadn't caught a single fish all day! People all around him were regularly catching them, and he hadn't hooked one. He was about to explode. I asked him what he was using. "Oh, my best fly." He showed me a pattern called a halfback which is a brown fly about an inch and an half long. A great stonefly imitation, but useless on the San Juan. He added hopefully, "It always works on the White River back in Arkansas." I showed him some of the tiny midge patterns, and gave him a couple to use the next day. "But how the hell do you tie 'em on?" He asked. I just shrugged and told him that if he wanted to catch a fish, he'd have to use what they were eating. I stepped into his spot and hooked up right away with a 20" rainbow and caught a half a dozen more before I decided it was time to quit and go get some dinner.

My favorite reference for tying tiny flies is Ed Engle's book Tying Small Flies. Even on these small flies different tiers exhibit different styles. I like Ed's style.

Sometimes it's only the teeny tiniest of flies that will enable you to catch a big trout.